A power bank for every attendee
The event mark on a few hundred power banks, printed from one jig on one setup.
Branded tech / logos on power banks, chargers, cases and drives
Your logo on power banks, chargers and cases.
PrintAWorld UV prints logos and full-color artwork onto power banks, wireless chargers, earbud cases, USB drives, phone cases and other tech giveaways you supply, in our Brooklyn studio. The pieces sit in a 3D printed jig and print directly, white ink under the colors on black plastic, with a test on a spare before the run. A job is a $150–$250 setup plus $20–$30 per piece, from a single sample to a few hundred for a conference.
Branded power banks
Flat plastic, a jig, and your logo in the same spot every time.
A power bank or a charger has a flat top, which is all the flatbed needs. We 3D print a jig that holds a batch in rows, print the logo in one pass, and every piece comes out with the mark in the same place. Black plastic gets a white layer under the colors; a white-only logo on black prints in one layer.
You supply the devices. We don’t stock tech, and the brand and finish decide the ink: glossy or soft-touch plastics get an adhesion promoter and a test on a spare first. Programming a USB drive or an NFC tag is not part of the job.
Curved items like a round speaker get a printed transfer applied by hand instead.
Tech giveaway ideas
01 / THE IDEASPower banks, chargers, earbud cases and drives.
Full color across the whole face
One logo across a tech set
Printed from a jig, six at a time
The kinds of printed tech giveaways we print. Send your artwork and a photo of the item for a proof on the real piece.
Who orders them
02 / THE USESBranded tech for conferences, onboarding and clients.
A tech kit for new hires
The company logo on a charger, earbud case and drive, matched across the set.
A premium charger with a name
Full color on a white charger or a name on each, every design proofed.
Samples before a run
One printed sample on the device you plan to order, so you see the logo on the real thing first.
Which devices
03 / THE MATERIALABS, soft-touch, aluminum and glass.
Matte ABS plastic
The common power bank body. Prints directly and holds the ink well.
Soft-touch and glossy plastic
Coatings can repel ink. We apply an adhesion promoter and test on a spare before quoting the run.
Aluminum and steel
Anodized aluminum takes fine detail; bare metal gets a promoter. For a mark that never wears, we laser engrave instead.
Glass and clear cases
Clear phone cases print on the inside, mirrored over white, so the artwork is protected.
How it works
04 / THE PROCESSFrom your devices to a printed run.
Standard lead time is 2–3 weeks after the devices reach us and you approve the test; a new jig takes about two weeks of that.
Send the artwork and a photo
Vector artwork or a transparent PNG, a photo or link of the device, where the logo goes and how big.
Ship or drop off the devices
With a few spares. The run starts when they are here, so tell us when they ship.
Approve a test
We print one, check adhesion, send a photo and lock the position.
We print from the jig
Rows at a time, checked piece by piece, packed back in your cartons.
Pricing
05 / THE PRICEPower bank and tech printing pricing.
UV printing setup$150–$250
Once per job: the jig, a proof and a test on a spare. Counts toward the job.
What sets the price
Printing, per power bank or charger, one side$20–$30 per piece
A second side or locationQuoted per project
Small items like drives and earbud casesQuoted per project
A custom jig for a large runQuoted per project
Rush for an eventCase by case
At PrintAWorld, UV printing power banks is a $150–$250 setup per job (the jig, a proof and a test on a spare, counted toward the job) plus $20–$30 per piece. A second location, very small items and a custom jig for a large run are quoted per project; you supply the devices. Rush adds 50% per piece. The minimum order is $200. Ask for several quantities and we price each one.
Price my power banks
Send what you have. We’ll reply with a written quote for each quantity, with no payment needed to ask.
Power banks in bulk
A few hundred for a conference, on one jig.
For hundreds of pieces we size the jig to the device and print row after row on the same setup. A small one-color logo at volume costs less per piece than full color on a few, and we quote each quantity so you can see where the price drops.
Planning thousands? We run the first hundred to standardize the setup, then quote the rest in tiers.
Plan a conference runFrom client emails
What our clients wrote to us.
Our clients rarely leave online reviews, so these are from the emails they sent us after their projects, quoted as written.
“Thanks again for your help! The mugs were a huge hit!”
“Thank you again for all your help with this project. It was a pleasure working with you and your team. Until the next one!”
Before you order
Branded tech questions, answered.
How much does a branded power bank cost?
At PrintAWorld, UV printing power banks is a $150–$250 setup per job (the jig, a proof and a test on a spare, counted toward the job) plus $20–$30 per piece. A second location, very small items and a custom jig for a large run are quoted per project; you supply the devices. Rush adds 50% per piece. The minimum order is $200. Ask for several quantities and we price each one.
Do you supply the power banks?
No. We don’t stock blanks, only sheet acrylic, so you supply the devices. Ship them with tracking or drop them off at 616 Berriman St, Brooklyn, NY, 12–5 pm Monday to Friday. Send 2–3 spares on a small run and 5–10 on a run of hundreds; we test on a spare before we print the rest.
Will the ink stay on a glossy or soft-touch power bank?
Usually, with an adhesion promoter, which is why we test on a spare first. A few coatings won’t hold ink; the test tells us before you pay for a run. Pricing is final once the test is done.
Can you print full color on a black power bank?
Yes. We print a white layer first and the colors on top, so the artwork stays bright on black. A white-only logo prints in one layer.
Can you print on phone cases?
Yes, on flat-backed cases. Clear cases print on the inside, mirrored over white, so the artwork is protected. Cases with a curved or textured back get a transfer applied by hand.
Do you program the drives or NFC tags?
No. We print the outside; loading files onto a drive or programming an NFC tag is not part of the job.
Is there a minimum order?
The minimum order is $200 per job, which the $150–$250 setup counts toward. One sample is fine when the job clears it. The setup is charged once, so a larger run costs less per piece.
Do you test before printing the whole order?
Every new item gets a test print on a spare, which you approve before the run. Send 2–3 spares for a small run, 5–10 for hundreds and about 3% for thousands. Pricing is final once the test is done.
How long does it take?
Standard UV printing lead time is 2–3 weeks after your items reach us and you approve the proof, plus shipping. A job that needs a new jig takes about two weeks to set up and a week to print. For a conference, send the request a month ahead and the devices as soon as they land. Rush is possible when we can start the day you approve: it adds 50% per piece and is paid up front.
Do you ship?
Yes, anywhere in the United States. You pay shipping both ways, or pick up from the Brooklyn studio by appointment. We don’t drop-ship to your customers.
Start your order
Tell us about your tech run.
Send the artwork, the device and the count. We’ll reply with a written quote for each quantity.
Get a power bank quoteWhat to send
- Your logo or artwork (vector or transparent PNG)
- A photo or link of the power bank, charger or case
- Where the logo goes, how big, one side or two
- How many, when the devices can reach us, and your in-hand date
More UV printing
Other things we print on.
Printed packagingCustom printed tinsLogos on the lids of tins, jars and boxes you supply, in runs of a few hundred.
CardsMetal business cardsBlack, stainless and brass cards with a name on each, plus VIP cards.
Client & team giftsCustom corporate giftsYour logo and every name on tumblers, boards, leather and metal.
Pricing from PrintAWorld’s published UV printing terms · Updated