From a 6-inch foam model to a full-size chair.
The artist hand-cut a small foam model. We scanned it, refined the 3D model with the artist, then scaled it up for the full-size chair with a metal finish and rosewood legs.



PrintAWorld turns sketches, photos, measurements, scans, or rough files into 3D models that are ready to make. We model characters, products, prototypes, plaques, and props, send the model for your review, then deliver the file or 3D print it in our New York studios. 3D modeling starts at $250; the quote sets the files, review rounds, and schedule.

Watertight, printable geometry for a figure, prop, part, or prototype.
What we modelFor parts you’ll change, machine, or manufacture. Tell us the fits that matter.
Model, CAD or render?We model it, print it in-house, and sand, paint, or plate it if you want. Printing from about $30.
How it worksA 3D modeling service builds the digital shape of something that doesn’t have a file yet: a product, a character, a part, a plaque. The model is what a 3D printer, CNC machine, or manufacturer needs to make it.
We model for making, not for screens. Tell us how the piece will be produced and we build the model for that, then print and finish it in-house if you want.
The artist hand-cut a small foam model. We scanned it, refined the 3D model with the artist, then scaled it up for the full-size chair with a metal finish and rosewood legs.




A detailed figure sculpted digitally, with anatomy and hardware modeled for printing.

A product housing modeled to size, then printed to check the fit.

A plaque modeled with a relief portrait, border and raised lettering.

A mechanical concept model, built part by part so it can be printed and assembled.

A discontinued car part rebuilt as editable CAD from its scan.

An artist’s designer toy, modeled from a small original and printed large.
From a sketch or measurements to a model sized for printing, fit checks, or a pitch sample.
A 2D drawing or logo character sculpted in 3D. A front view is enough to start; we design the sides and back.
Logos, lettering, portraits, and bases modeled to print, paint, or plate.
Oversized products and props modeled to split into printable sections.
Rebuilt from measurements or a 3D scan, with the holes and edges that must fit.
A maquette, clay piece, or design study refined and scaled up for fabrication.
3D modeling makes the shape: right for figures, props, plaques, and most printed pieces, delivered as STL or OBJ. CAD is an editable, dimension-driven model, delivered as STEP, for parts you’ll change, machine, or manufacture. Rendering makes images of a model; we quote it only when you ask.
Copying a real object? A 3D scan captures its shape first. Scanning starts at $250, and STEP rebuilt from a scan adds about $150–$300 for simple parts.
Explore 3D scanningSketches, photos from a few angles, measurements, or a file. Tell us what the model is for and how big it will be.
It lists the model, file format, review rounds, price, and schedule, plus printing or finishing if you want them.
We share views of the model and make the agreed revisions before anything is delivered or printed.
We send the approved files, or print and finish the piece in-house and ship it to you.
Want it made? We 3D print in-house in New York from about $30, with no setup fee, and can sand, paint, or plate the piece. See 3D printing.
Per project, for a model from your references.
For planning only. Detail, references, files, and review rounds set the final price.
Send references and a person replies with a price.
3D modeling starts at $250 per project. The price depends on the detail, the references you have, the files you need, and the review rounds. Characters, likenesses, and complex assemblies are quoted per project. Printing the model starts at about $30.
Yes. Send the sketch or photos from a few angles, with the size you want. A front view is often enough for a character; we design the sides and back. You review the model before it’s delivered or printed.
Describe it and send any reference images, even rough ones. We tell you whether that’s enough to model from, and the quote lists what we’ll make.
STL or OBJ for 3D printing, and STEP when you need editable CAD for changes or machining. The quote names the format before work starts.
No. A model made only to look right may have thin walls or open surfaces. Tell us how it will be made, and we model it for that process, at the right size and wall thickness.
Yes. Send photos with a ruler and the measurements that matter. For complex shapes, we 3D scan the original first; scanning starts at $250, and STEP rebuilt from a scan adds about $150–$300 for simple parts.
It’s quoted per project. Timing depends on the detail, how complete the references are, and how quickly review rounds go. Tell us your date when you send references.
The written quote states the included review and revision rounds before modeling begins.
Yes. We print in-house in New York, from about $30 with no setup fee, and can sand, paint, or metal-plate the piece. Finishing is quoted with the print.
3D modeling makes the digital shape. CAD is an editable, dimension-driven model for engineering and manufacturing. Rendering makes images of a model. We quote renders only when you ask for them.
Our studios are in Glendale, Queens and Brooklyn, and most modeling projects run remotely: you send references, we send the model to review. Printed pieces ship to all 50 states.
You don’t need a drawing or a 3D file. In the planner, choose “A sketch, photo or idea” and send what you have. We’ll reply with a price and next steps.
Get my modeling quoteService details reviewed by PrintAWorld ·