FIGURE MATERIALS COMPARED

Resin vs vinyl figures: resin for one to 500 pieces, vinyl from 300 when price per piece matters most

Choose resin for a prototype, a one-off or a run of up to 500: no production mold, the finest detail, sculpted and hand-painted. Choose molded vinyl for 300 pieces or more, when a lower price per piece and a light figure that survives drops matter more than a mold fee for each character.

We make both, so this is the advice we give artists and brands before quoting. PVC is a type of vinyl, so most of what follows applies to PVC figures too.

Resin vs vinyl side by side

PrintAWorld makes both. Our prices and lead times, reviewed November 14, 2026.
PropertyResinVinyl (PVC)
LookCrisp, sharp detail. Sculpted and hand-painted, so each piece can have its own colors.Clean, smooth surfaces with good detail; every piece in the run matches.
Weight and feelHeavier, rigid and solid in the hand.Light, with a little give.
Detail possibleThe highest: fine textures, thin parts and small text.Good, though very fine detail is harder to hold than in resin.
DurabilityCan chip or break if dropped; made for display.Bends instead of breaking, so it handles drops and play. Heat can soften it.
Minimum quantityNone. Runs of 1 to 500 pieces, with a $450 minimum project budget.300 pieces per character.
Typical priceAbout $450 for a simple 6-inch prototype, with the 3D model, paint in up to 3 colors and 1–2 revisions. Runs are priced per piece for the quantity.A mold for each character, typically about $1,500, plus production quoted for the run. Less per piece than resin at volume.
Typical lead timeTypically 3–4 weeks for a simple figure, including the 3D model and revisions.Confirmed in your written quote for the run.
Best forPrototypes, one-offs, gifts, limited editions and mascot awards.Merch and designer toys sold by the hundreds or thousands.
Three banana-shaped character figures with long hair, painted in purple, red and teal colorways on round bases
One character in three painted colorways, from our studio.

Which should you choose?

Choose resin when

  • You need one figure, a prototype or a limited edition of up to 500.
  • Detail matters most: a likeness, fine texture, thin parts.
  • You want to see and approve a painted sample before anything else.
  • The figure is for display, not for play.

Choose vinyl when

  • You need 300 or more of the same character.
  • The lowest price per piece matters more than the mold fee.
  • The figure will be handled, carried or played with.

What PrintAWorld makes

We sculpt figures in 3D from your sketch, photos or concept, print them in resin and paint them by hand. A simple 6-inch figure is about $450, and resin runs go from 1 to 500 pieces.

For 300 or more of one character, we plan molded vinyl production: a mold for each character, typically about $1,500, plus production. Many projects start with a resin prototype to settle the design first; the prototype doesn’t include vinyl tooling.

Common questions

Is resin or vinyl better for figures?

Resin is better for detail and for small numbers: one figure, a prototype or a run of up to 500, with no production mold. Vinyl is better for 300 pieces or more, when a lower price per piece and a figure that survives drops matter most.

What is the difference between PVC and vinyl figures?

PVC is a type of vinyl, so the names overlap. Both are molded plastics made from a production mold, lighter and more flexible than resin, and both suit large runs.

What is the minimum order for custom vinyl figures?

300 pieces per character, plus a mold for each character, typically about $1,500. Production is quoted on top, based on the design, size, colors and quantity.

Can I order just one resin figure?

Yes. One figure is fine. A simple 6-inch figure is about $450, and resin projects start at a $450 total budget.

Why do resin figures cost more per piece than vinyl?

Each resin figure is printed, cleaned up and painted by hand, so the hand work sets the price. A vinyl run spreads the cost of its mold over hundreds of pieces, so each piece costs less once you order enough.

Should I make a resin prototype before a vinyl run?

Usually, yes. A painted resin prototype, about $450 for a simple 6-inch figure, lets you check shape, proportions and colors before paying for a mold. It doesn’t include vinyl tooling.

Written by PrintAWorld from our own studio work, reviewed November 14, 2026. Properties of materials we don’t make are general guidance. Your written quote confirms the final scope, price and schedule.

Call the studio

  • Mon–Fri 10am–6pm
  • Sat–Sun 12pm–6pm

New York time. No walk-ins: visits and pickups by appointment.